The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM.
Operation
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the sequence to T2.
Specifications
| Technical Data | |
| Operation | OFF/ON recycling solid-state flasher (continuous duty |
| Flash Rate | Fixed at 75 FPM ±10% |
| ON/OFF Ratio | ≅ 50% |
| Custom Flash Rate | 60 – 150 FPM |
| Input | |
| Voltage | 12VDC |
| Output | |
| Load Type | Incandescent or resistive |
| Maximum Load Rating | 0.25 – 2.5A steady state |
| Inrush | 10 times steady state current |
| Mechanical | |
| Mounting | Surface mount with one #10 (M5 x 0.8) screw |
| Dimensions |
H 50.8 mm (2”); W 50.8 mm (2”); D 30.7 mm (1.21”) |
| Termination | 0.25 in. (6.35 mm) male quick connect terminals |
| Protection | |
| Circuitry | Encapsulated |
| Environmental | |
| Operating/Storage Temperature | -20° to 60°C / -40° to 85°C |
| Weight | ≅ 2.2 oz (62 g) |
| Humidity | 95% relative, non-condensing |
Reviews
There are no reviews yet.