The FS500 Series flash rate is adjustable from 10 to 100 FPM. A locknut is provided to hold selected flash rate. The long-life electronic circuit combined with a quality electromechanical relay provides flexibility and reliability in most applications.
Operation
Upon application of input voltage, the output relay is energized and the ON time begins. At the end of the ON time, the output relay de-energizes and the OFF time begins. At the end of the OFF time, the output is energized and the cycle repeats as long as input voltage is applied.
Reset: Removing input voltage resets the output and the sequence.
| Technical Data | |
| Operation | ON/OFF recycling flasher with adjustable flash rate |
| Flash Rate | Adjustable from 10 – 100 operations per minute (guaranteed range) |
| ON/OFF Ratio | ≅ 50% |
| Input | |
| Input Voltage | 120VAC/DC |
| Tolerance | -20% – 10% |
| AC Line Frequency | 50/60Hz |
| Output | |
| Load Type | Electromechanical relay |
| Form | DPDT |
| Rating |
10A resistive @ 120/240VAC & 28VDC; 1/3 hp @ 120/ 240VAC |
| Mechanical | |
| Mounting | Plug-in socket |
| Dimensions |
H 91.6 mm (3.62”); W 60.7 mm (2.39”); D 45.2 mm (1.78”) |
| Termination | Octal 8-pin plug-in |
| Protection | |
| Isolation Voltage | ≥ 1500V RMS input to output |
| Polarity | DC units are reverse polarity protected |
| Environmental | |
| Operating/Storage Temperature | -20° to 60°C / -30° to 85°C |
| Weight | ≅ 5.8 oz (164 g) |
Reviews
There are no reviews yet.